HID® EDGE EVO® Solo ESHR40-L

HID® EDGE EVO® Solo ESHR40-L

Networked Controller/Reader & Module

OVERVIEW

HID Global’s EDGE EVO® Solo ESHR40-L Controller/Reader and Module is a cost-effective, stand-alone, IP -enabled access control solution that is designed for sites with one or two doors in an indoor, non-monitored environment. Distributing intelligence right to the door, the single-door solution provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by eliminating the need to install a separate power supply. It also utilizes less expensive CAT5 wiring compared to traditional structured cable.The ESHR40-L is a single door controller/reader and module with native interfaces to one NC or NO lock. CAT-5 cable is routed directly to reader/controller located next to the door and an internal four-wire bus then connects the reader with module designed for installation in close proximity (e.g. behind reader in US-single gang box or in hollow door frame). The module connects the reader/controller to the lock. The ESHR40-L is ideal for securing a single non-monitored door located indoors that uses a traditional lock.

 

SPECIFICATIONS
  • Model (and Part #): ESHR40-L (83120CKL000)
  • Mounting Holes – EHR40: US Single-gang and EU / APAC 60mm
  • Mounting Holes – ELM: Fits within US Single-gang or in hollow door frame
  • Dimensions – EHR40: 3.3″ W x 4.8″ H x 1.2″ D (83.9 mm x 122.2 mm x 30.5 mm)
  • Dimensions – ELM: 2.9″ W x 1.3″ H x 0.7″ D (73.0 mm x 32.0 mm x 19.0 mm)
  • Weight – EHR40: 6.3oz (180g)
  • Weight – ELM: 4.9oz (140g)
  • Operating Temperature: 32° to 122° F (0° to 50° C)
  • Operating Humidity: 5% to 95% relative, non-condensing
  • Communication Ports: Ethernet (10/100), Hi-O CANbus
  • 13.56 MHz Card Compatibility: 13.56 MHz iCLASS HID Application, ISO14443A CSN
  • Warranty: Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
  • DC Input (MAX) @ PoE: 14.4W (300mA @ 48VDC)
  • DC Input (MAX) @ AUX +12VDC:18W (1500mA @ 12VDC)
  • DC Input (MAX) @ AUX +24VDC: 36W (1500mA @ 24VDC)
  • Supervised Inputs Power (MAX) : 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref
  • DC Input @ PoE: 8W
  • DC Input @ AUX +12VDC:13.1W
  • DC Input @ AUX +24VDC: 26.6W
  • Hi-O CANbus Output Voltage, DC Input = PoE: 24VDC
  • Hi-O CANbus Output Voltage, DC Input = AUX: AUX +VDC

 

Download
Datasheet SOLO ESHR40-L Download

,

Contattaci per Informazioni Tecniche o Commerciali!